Channel types
| Channel type | Label | Description |
|---|---|---|
co7io-s7:switch |
On/Off Switch |
|
co7io-s7:contact |
Open/Closed contact |
|
co7io-s7:number |
Numeric value |
Configuration of co7io-s7:switch
Below table contain configuration parameters which can be assigned to channels of type co7io-s7:switch.
| Name | Type | Label | Description |
|---|---|---|---|
field |
TEXT |
Field |
Field to be read from PLC. Supported format of field: %I0.1:BOOL %Q0.4:BOOL %M9.0:BOOL %DB1.DBX38.1:BOOL Where %I stand for input, %Q for output, %M for memory and %DB for store. |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles. If no value is given polling is based on value set on thing or bridge value. |
Configuration of co7io-s7:contact
Below table contain configuration parameters which can be assigned to channels of type co7io-s7:contact.
| Name | Type | Label | Description |
|---|---|---|---|
field |
TEXT |
Field |
Field to be read from PLC. Supported format of field: %I0.1:BOOL %Q0.4:BOOL %M9.0:BOOL %DB1.DBX38.1:BOOL Where %I stand for input, %Q for output, %M for memory and %DB for store. |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles. If no value is given polling is based on value set on thing or bridge value. |
Configuration of co7io-s7:number
Below table contain configuration parameters which can be assigned to channels of type co7io-s7:number.
| Name | Type | Label | Description |
|---|---|---|---|
field |
TEXT |
Field |
Field to be read from PLC. Supported format of field: %MW0:SINT Where %I stand for input, %Q for output, %M for memory and %DB for store. Instead of SINT you can use: USINT UINT DINT UDINT LWORD LINT ULINT REAL LREAL |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles. If no value is given polling is based on value set on thing or bridge value. |