Config descriptions

dib

TEXT

Data Information Block (DIB)

Data identification block in hex format - allows to determine data encoding.

vib

TEXT

Value Information Block (VIB)

Value identification block allows to interpret value.

serialPort

TEXT

Serial port

Serial interface port.

baudRate

INTEGER

Baud rate

Baud rate for serial connection.

dataBits

TEXT

Baud rate

Data bits in each serial transmission.

stopBits

TEXT

Baud rate

Stop bits after transmission.

parity

TEXT

Parity

Parity of serial transmission.

discoverDevices

BOOLEAN

Discover devices

Turn on or off discovery of new devices for this interface.

discoveryTimeToLive

INTEGER

Time to live

Time to live (TTL) in minutes for discovered elements. After passing of TTL element will be removed, possibly re-discovered when appears again. This setting can be used to discard invalid records produced by unstable radio interface. Please note that some devices may have irregular communication schedule. Value of -1 disables time to live. Common values are 60 (one hour) and 1440 (one day).

discoveryMethod

TEXT

Discovery method

Scan method used for discovery of devices connected to this M-Bus bridge.

wildcardMask

TEXT

Wildcard mask

Address mask (in hex format) used to scan secondary addresses on the bus. Used only if 'Secondary address' scan is enabled.

refreshInterval

INTEGER

Refresh interval

Time between poll cycles.

address

INTEGER

Primary address

discoverChannels

BOOLEAN

Discover channels

Enable automatic creation of channels based on polled data.

serialNumber

INTEGER

Serial number

manufacturerId

TEXT

Manufacturer identifier

Three character identifier of manufacturer, for example 'KAM' for Kamstrup.

version

INTEGER

Version

deviceType

TEXT

Device type

Type of device according to standard.

refreshInterval

INTEGER

Refresh interval

Time between poll cycles.