Bridge types
| Bridge | Label | Description |
|---|---|---|
co7io-mbus:openhab-serial |
Serial Bridge |
The M-Bus Serial bridge allows to poll data using compatible serial interfaces. |
Bridge co7io-mbus:openhab-serial
Below table contains complete configuration of co7io-mbus:openhab-serial.
| Name | Type | Label | Description |
|---|---|---|---|
serialPort |
TEXT |
Serial port |
Serial interface port. |
baudRate |
INTEGER |
Baud rate |
Baud rate for serial connection. |
dataBits |
TEXT |
Baud rate |
Data bits in each serial transmission. |
stopBits |
TEXT |
Baud rate |
Stop bits after transmission. |
parity |
TEXT |
Parity |
Parity of serial transmission. |
discoverDevices |
BOOLEAN |
Discover devices |
Turn on or off discovery of new devices for this interface. |
discoveryTimeToLive |
INTEGER |
Time to live |
Time to live (TTL) in minutes for discovered elements. After passing of TTL element will be removed, possibly re-discovered when appears again. This setting can be used to discard invalid records produced by unstable radio interface. Please note that some devices may have irregular communication schedule. Value of -1 disables time to live. Common values are 60 (one hour) and 1440 (one day). |
discoveryMethod |
TEXT |
Discovery method |
Scan method used for discovery of devices connected to this M-Bus bridge. |
wildcardMask |
TEXT |
Wildcard mask |
Address mask (in hex format) used to scan secondary addresses on the bus. Used only if 'Secondary address' scan is enabled. |
refreshInterval |
INTEGER |
Refresh interval |
Time between poll cycles. |