Channel types
| Channel type | Label | Description |
|---|---|---|
co7io-fatek:contact |
Contact |
A read only channel which represent state of input or output. |
co7io-fatek:discrete |
Switchable discrete register |
Discrete register of connected PLC which can be commanded. |
co7io-fatek:data16 |
Data register (16 bit) |
Data register of connected PLC encoded using 16 bit registers. |
co7io-fatek:data32 |
Data register (32 bit) |
Data register of connected PLC encoded using 32 bit registers. |
co7io-fatek:percent16 |
Percent (16-bit) |
Data register for representing percentage expressed as integer (0 … 100) based on 16 bit register. |
co7io-fatek:percent32 |
Percent (32-bit) |
Data register for representing percentage in range as integer or floating point number based on 32 bit register. |
co7io-fatek:rollershutter16 |
Rollershutter (16-bit) |
Data register for position will use 16 bit registers. |
co7io-fatek:rollershutter32 |
Rollershutter (32-bit) |
Data register for position will use 32 bit registers. |
co7io-fatek:color16 |
Color (16-bit) |
Data register for position will use 16 bit registers. |
co7io-fatek:color32 |
Color (32-bit) |
Data register for position will use 32 bit registers. |
Configuration of co7io-fatek:contact
Below table contain configuration parameters which can be assigned to channels of type co7io-fatek:contact.
| Name | Type | Label | Description |
|---|---|---|---|
register |
TEXT |
Register |
Type of discrete register to read or write. |
index |
INTEGER |
Register index |
Index of register used to retrieve data. |
invert |
BOOLEAN |
Invert |
Invert logical representation of related register (0→1, 1→0). |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles, 0 assumes same value as Thing for which this channel is defined. |
Configuration of co7io-fatek:discrete
Below table contain configuration parameters which can be assigned to channels of type co7io-fatek:discrete.
| Name | Type | Label | Description |
|---|---|---|---|
register |
TEXT |
Register |
Type of discrete register to read or write. |
index |
INTEGER |
Register index |
Index of register used to retrieve data. |
invert |
BOOLEAN |
Invert |
Invert logical representation of related register (0→1, 1→0). |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles, 0 assumes same value as Thing for which this channel is defined. |
Configuration of co7io-fatek:data16
Below table contain configuration parameters which can be assigned to channels of type co7io-fatek:data16.
| Name | Type | Label | Description |
|---|---|---|---|
register |
TEXT |
Register |
Type of data register to read or write. |
index |
INTEGER |
Register index |
Index of register used to retrieve data. |
unsigned |
BOOLEAN |
Unsigned |
Values retrieved from and written to device assume unsigned representation. |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles, 0 assumes same value as Thing for which this channel is defined. |
Configuration of co7io-fatek:data32
Below table contain configuration parameters which can be assigned to channels of type co7io-fatek:data32.
| Name | Type | Label | Description |
|---|---|---|---|
register |
TEXT |
Register |
Type of data register to read or write. |
index |
INTEGER |
Register index |
Index of register used to retrieve data. |
floating |
BOOLEAN |
floating point |
Indicate that read/write value is a floating point number. Overrides unsigned flag. |
step |
DECIMAL |
Step |
Value assumed for increase/decrease command. |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles, 0 assumes same value as Thing for which this channel is defined. |
Configuration of co7io-fatek:percent16
Below table contain configuration parameters which can be assigned to channels of type co7io-fatek:percent16.
| Name | Type | Label | Description |
|---|---|---|---|
register |
TEXT |
Register |
Type of data register to read or write. |
index |
INTEGER |
Register index |
Index of register used to retrieve data. |
step |
INTEGER |
Step |
Value assumed for increase/decrease command. |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles, 0 assumes same value as Thing for which this channel is defined. |
Configuration of co7io-fatek:percent32
Below table contain configuration parameters which can be assigned to channels of type co7io-fatek:percent32.
Configuration of co7io-fatek:rollershutter16
Below table contain configuration parameters which can be assigned to channels of type co7io-fatek:rollershutter16.
| Name | Type | Label | Description |
|---|---|---|---|
register |
TEXT |
Register |
Data register used to retrieve position of roller shutter. |
index |
INTEGER |
Register index |
Index of register used to retrieve data. |
unsigned |
BOOLEAN |
Unsigned |
Values retrieved from and written to device assume unsigned representation. Does not apply if floating option is set. |
floating |
BOOLEAN |
floating point |
Indicate that read/write value is a floating point number. Overrides unsigned flag. |
startRegister |
TEXT |
Register |
Type of discrete register to write UP command. |
startIndex |
INTEGER |
Register index |
Index of register used to write data. |
startInvert |
BOOLEAN |
Invert |
Invert logical representation of related register (0→1, 1→0). |
stopRegister |
TEXT |
Register |
Type of discrete register to write DOWN command. |
stopIndex |
INTEGER |
Register index |
Index of register used to retrieve data. |
stopInvert |
BOOLEAN |
Invert |
Invert logical representation of related register (0→1, 1→0). |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles, 0 assumes same value as Thing for which this channel is defined. |
Configuration of co7io-fatek:rollershutter32
Below table contain configuration parameters which can be assigned to channels of type co7io-fatek:rollershutter32.
| Name | Type | Label | Description |
|---|---|---|---|
register |
TEXT |
Register |
Data register used to retrieve position of roller shutter. |
index |
INTEGER |
Register index |
Index of register used to retrieve data. |
unsigned |
BOOLEAN |
Unsigned |
Values retrieved from and written to device assume unsigned representation. Does not apply if floating option is set. |
floating |
BOOLEAN |
floating point |
Indicate that read/write value is a floating point number. Overrides unsigned flag. |
startRegister |
TEXT |
Register |
Type of discrete register to write UP command. |
startIndex |
INTEGER |
Register index |
Index of register used to write data. |
startInvert |
BOOLEAN |
Invert |
Invert logical representation of related register (0→1, 1→0). |
stopRegister |
TEXT |
Register |
Type of discrete register to write DOWN command. |
stopIndex |
INTEGER |
Register index |
Index of register used to retrieve data. |
stopInvert |
BOOLEAN |
Invert |
Invert logical representation of related register (0→1, 1→0). |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles, 0 assumes same value as Thing for which this channel is defined. |
Configuration of co7io-fatek:color16
Below table contain configuration parameters which can be assigned to channels of type co7io-fatek:color16.
| Name | Type | Label | Description |
|---|---|---|---|
color1register |
TEXT |
Color 1 register |
Data register used to retrieve or write Red or Hue part of color information. |
color1index |
INTEGER |
Register index |
Index of register used to retrieve data. |
color2register |
TEXT |
Color 2 register |
Data register used to retrieve or write Green or Saturation part of color information. |
color2index |
INTEGER |
Register index |
Index of register used to retrieve data. |
color3register |
TEXT |
Color 2 register |
Data register used to retrieve or write Blue or Brightness part of color information. |
color3index |
INTEGER |
Register index |
Index of register used to retrieve data. |
step |
DECIMAL |
Step |
Value assumed for increase/decrease command. |
rgb |
BOOLEAN |
RGB mode |
Write and interpret read data as RGB code instead of HSB. |
refreshInterval |
INTEGER |
Refresh interval |
Time between next poll cycles, 0 assumes same value as Thing for which this channel is defined. |
switcherRegister |
TEXT |
Register |
Type of discrete register to write ON or OFF command. |
switcherIndex |
INTEGER |
Register index |
Index of register used to write data. |
switcherInvert |
BOOLEAN |
Invert |
Invert logical representation of related register (0→1, 1→0). |